Many people rely on car maintenance to keep their vehicles running well and safely for as long as possible.
Automotive service technicians provide a variety services, from basic repairs to complex technology work. They must have a deep understanding of how cars’ integrated electronic systems and complex computers operate.
Oil Change
Oil is essential for your vehicle’s engine to run safely and smoothly. Motor oil is a type of oil that keeps your engine’s parts lubricated. This helps to prevent them from overheating, or seizing up.
When the oil in your car becomes dirty it loses its lubricating properties. Old, dirty oil can cause your engine to overheat and can even lead to rusting of metal parts. This is why it is so important to get your oil changed regularly.
Oil changes were traditionally recommended every 3,000 miles. But with advances in both engines and oil, you might be able to get away with changing your oil more frequently — maybe every 7,500 or even 10,000 miles!
The type of oil you use and the mileage you drive will determine how often you need to change your oil. It’s also important to follow your owner’s manual.
People make the most common mistake of not changing their oil enough. Ask the shop where you purchased your car for guidance on how many miles you can expect between oil changes.
It’s also important to be aware of the climate where you live and how you drive, since these factors will influence your oil change frequency. Oil will break down quicker in hot weather than in cooler temperatures. Wind-blown sand or dirt can also get into your engine, making your oil less able to lubricate it.
When determining the oil change schedule for your engine, it is important to consider its age. Because of the wear and tear that older engines experience, it is more important to change your oil frequently than you would with a new one.
An oil change can be a quick, simple and inexpensive way to keep your engine working smoothly. You won’t have to pay for costly engine repairs later. A home oil change is possible if your car is a DIY project. Make sure your vehicle runs smoothly by using a high-quality oil.
Tire Rotation
Tire rotation is a process of rotating your tires so that they wear evenly. This is essential for the safety and longevity your tires. It prevents uneven wear that could cause problems with steering, braking, and driving in difficult weather conditions.
It can also improve the quality of your ride, and increase your ability to drive in all conditions. It will make your tires last longer and help you save money in the long-term.
A basic car maintenance routine includes a tire rotation. The front and rear tires are taken off the car and the wheels rotate around the axle.
The type of car and the drivetrain of your vehicle will determine the pattern of the rotation. For example, a front-wheel drive (FWD) tire rotation will move the front tires to the rear and the rear tires to the front in a cross-diagonal pattern.
A tire rotation that uses all-wheel-drive (AWD), moves both the rear right and rear tires to the front on the exact same side. Then, it swaps them with the front right or left rear.
There are many other ways to rotate your tire, but the easiest is to move them from one side to the other. This is the easiest, but not for all situations.
In addition, some types of tires will require a different rotation pattern than others, so be sure to consult your owner’s manual or your dealer. The correct pattern will depend on your tire type, your vehicle’s drivetrain, and whether or not you have a full-size spare in your car.
It is also worth noting that tires are susceptible to a variety of different stresses and that the weight placed on them differs depending on where they are located. If the tires are in the front of the vehicle, they will bear more weight than those in the rear. They will also have to brake and steer less often because of their position. This can lead to uneven wear and uneven wear across the entire tire.
Battery Check
The battery is an integral component of any vehicle that works. It powers the engine and many other electrical systems. It is vitally important that the battery be tested regularly to ensure it stays strong and healthy.
A common auto service that is performed at most full-spectrum repair shops is a battery check. This simple test takes less than five minutes.
The batteries are an essential component of any car. They should be checked regularly for safety, warranty compliance, and customer satisfaction. If the test results indicate that they are not working properly, they can be easily replaced.
An inexpensive multimeter is one of the best ways to check your battery. This device is a great tool to keep in your garage and can be used to determine if your battery needs to be charged or replaced.
An adjustable load test is another way to determine if your battery is in good shape. This test measures the voltage drop under heavy loads.
If the battery’s voltage at rest is lower than 12.2 volts, it will likely need to be charged or replaced.
You should test your battery’s remaining voltage and check for corrosion. Corrosion can interfere with the ability of your battery to conduct current to the critical systems in your vehicle.
Whether you’re checking the resting voltage or simply cleaning out your battery, a battery check is an important preventative maintenance item that should be done at least twice a year.
Bad batteries can lead to a host of problems in your car. It is important to recognize these issues before they become more serious. Some of the more obvious signs that your battery is failing include a sluggish engine and flickering overhead lights when you try to start it.
If you don’t feel confident in your battery’s condition or have questions about it, contact Oldsmar Automotive and we can take a look at it 6 days a week!
Brake Inspection
The brakes are one of the most critical and important parts of any vehicle. Your car’s brakes could fail to work properly, putting you and others on your road at risk. This is why it is so important to regularly inspect your brakes and have any repairs made.
The brake system of your car is composed of a number of special components that work together to bring your car to a complete standstill. These components include calipers, drum or disc brakes, and wheel cylinders.
For your car to stop safely, each one of these components must be in a good working order. If they aren’t, it can cause increased braking distances and lower braking performance.
If you notice any issues with your brakes, it’s important to have them repaired immediately before they become worse. This will help you avoid any accidents or other mishaps on the road.
Your mechanic will inspect your brake system in order to perform a brake inspection. This includes checking the brake pads, rotors, brake fluid, caliper slides, pistons, and all the lines andhoses connecting them to your car’s brake master cylinder or power booster.
Your mechanic will also inspect your brake system for leaks or cracks. This will allow them to determine the best way to maintain your brakes.
An important automotive service that you should perform as often as your oil changes and tires are rotated is a brake inspection. It will save you money over the long-term and keep you and your car safe on the roads.
Before you schedule a brake inspection, make sure you find someone you can trust to do the job correctly. Ask friends and family for recommendations. This will ensure you get the best service possible.